" As the owner of two other Mya Moe ukuleles, I could hardly have been surprised when I recently opened the case for my resonator ukulele.  That trademark tone and playability will always welcome.  But I was genuinely surprised both by how good it looks and by how good it sounds.  And the sound--a remarkable combination of the koa wood and resonator cone--is as clear and loud as a bell.  Thanks to Gordon, Char, Aaron, Nicole, Ben, and everyone else in the Mya Moe family!"

- David G.

 

(scroll down for more photos)

 

Share this UkeTracker page on Facebook:

  • Curly Koa top, back & sides

  • Koa body binding

  • Hand-rubbed oil finish

  • Radiused Ebony fretboard with Ebony binding & Abalone markers

  • Mahogany neck

  • Geared machine head tuners with black buttons

  • Custom Signature Headplate

  • Schatten Designs Biscuit Bridge pickup

Hand-crafted in the USA by Gordon & Char Mayer and Aaron Keim. Each instrument is numbered & signed.

 

Wood Grade: Classic
Wood Availability: This wood species is available. Specific wood sets vary.

 

Gallery Photos (completed instrument)

Back

Front

Full Front
Build Schedule

Step

Description

 Picture, Click to Enlarge

1

bend sides, glue in neck block

2

glue in tail block, rout sound ports in top, install soundwell

3

rout & glue-in end graft, kerf top edge, kerf bottom edge, join top/back plates

4

brace top/back, glue back onto sides

5

carve braces, glue top onto sides, prep fretboard & neck

6

clean up body, rout dovetail, drill tuner holes, rout binding channels, glue in top binding

7

glue fretboard to neck, glue in back binding

8

prep for finish, glue neck/fretboard onto body

9

hand sand and prep for finish, first coat of oil

10

second coat of oil

11

third coat of oil

12

fourth coat of oil

13

apply lemon oil, setup cone & biscuit bridge (& pickup, if any)

14

final fretwork, cut nut, put in tuners, put on strings
Original Wood Set