" You guys are really wonderful to work with. I'm very pleased with the quality of your workmanship; the overall appearance of my new uke; the clean, clear sound; the accuracy of the tone at the higher frets; the tuning pegs; the shape of the neck. I even like the case. It's pretty snappy. One of the problems I have encountered with other ukes is that they "plink" at the 12th fret on at least one of the strings-usually the 1st. 1205 is crystal clear all the way up on all four strings."

- Dick J.

 

(scroll down for more photos)

 

Share this UkeTracker page on Facebook:

  • Curly Koa top, back & sides

  • Bloodwood body binding

  • Bloodwood rosette

  • Hand-rubbed oil finish

  • Radiused Ebony fretboard with Bloodwood binding & Abalone markers

  • Mahogany neck

  • Peghed brand geared tuners

  • Leopardwood & Maple Signature Headplate

Hand-crafted in the USA by Gordon & Char Mayer and Aaron Keim. Each instrument is numbered & signed.

 

Wood Grade: Classic
Wood Availability: This wood species is available. Specific wood sets vary.

 

Gallery Photos (completed instrument)

Back

Front

Full Front
Build Schedule

Step

Description

 Picture, Click to Enlarge

1

bend sides, glue in neck block

2

glue in tail block

3

rout & glue-in end graft, kerf top edge, kerf bottom edge, join top/back plates

4

brace top/back, glue back onto sides

5

carve braces, glue top onto sides, prep fretboard & neck

6

clean up body, rout dovetail, drill tuner holes, rout binding channels, glue in top binding

7

glue fretboard to neck, glue in back binding

8

shape neck, dress fret ends, join neck to body

9

hand sand and prep for finish, first coat of oil

10

second coat of oil

11

third coat of oil

12

fourth coat of oil

13

glue on bridge

14

make saddle, (put in pickup, if any), cut nut, final fretwork, put in tuners, put on strings
Original Wood Set