(scroll down for more photos)

 

Share this UkeTracker page on Facebook:

Our first concert resonator made for Aaron Keim of the Boulder Acoustic Society. We are so glad he asked for an all-myrtle instrument. We would never have thought of building one, yet it is one of the most stunning instruments we have made! Thanks, Aaron.

  • Master Grade Myrtle top, back & sides

  • Koa body binding

  • Hand-rubbed oil finish

  • Radiused Ebony fretboard with Koa binding & Abalone markers

  • Mahogany neck

  • Peghed brand geared tuners

  • Leopardwood & Maple Signature Headplate

  • K&K Biscuit Bridge pickup

13 total frets

 

Hand-crafted in the USA by Gordon & Char Mayer. Each instrument is numbered & signed.

 

Wood Grade: Master
Wood Availability: This wood species is available. Specific wood sets vary.

Cascade Series Wood Cascade Series Wood

 

Gallery Photos (completed instrument)

Back

Front

Full Front
Owner Pics & Instrument Videos

Aaron Keim

Aaron Keim of Boulder Acoustic Society gives a great fingerstyle lesson
Build Schedule

Step

Description

 Picture, Click to Enlarge

1

bend sides, glue in neck block

  

2

glue in tail block, rout sound ports in top, install soundwell

  

3

rout & glue-in end graft, kerf top edge, kerf bottom edge, join top/back plates

  

4

brace top/back, glue back onto sides

  

5

carve braces, glue top onto sides, prep fretboard & neck

  

6

clean up body, rout dovetail, drill tuner holes, rout binding channels, glue in top binding

  

7

glue fretboard to neck, glue in back binding

  

8

prep for finish, glue neck/fretboard onto body

  

9

hand sand and prep for finish, first coat of oil

  

10

second coat of oil

  

11

third coat of oil

  

12

fourth coat of oil

  

13

apply lemon oil, setup cone & biscuit bridge (& pickup, if any)

  

14

final fretwork, cut nut, put in tuners, put on strings